$300 12 Volt Electric Vacuum Pump Kit. These Stainless Steel Brakes electric vacuum pump kits are designed for use with a supercharger or big camshaft. They include a 12 V electric vacuum pump to supply your brake booster with the required power for brakes or other sources.  

 

Includes 12 volt vacuum pump, switching relay, vacuum line and control, mounting insulators and hardware. Dimensions: 8" L x 5" W x 7" H (approximate).  INSTRUCTION GUIDE

 

Vacuum Canisters capture vacuum from your engine for your power brakes. They are made for cars equipped with big cams and power brakes. These units approximately double the volume of vacuum available for your power brakes. They are recommended for cars with 14 inches of vacuum or less.

$75 Vacuum Reservoir Material: Aluminum Vacuum Reservoir Finish: Zinc plated Check Valves Included: Yes Gauge Port: Yes Vacuum Gauge Included: No Fittings Included: Yes Mounting Hardware Included: Yes Diameter (in): 5.000 in. Length (in): 7.000 in.

 

Holding the brakes for an extended period of time will consume the vacuum reserve!

$55 Vacuum Reservoir Material: Aluminum Vacuum Reservoir Finish: Black powdercoated Check Valves Included: Yes Gauge Port: Yes Vacuum Gauge Included: No Fittings Included: Yes Mounting Hardware Included: Yes Diameter (in): 5.000 in. Length (in): 7.000 in.

 

 

 

 Rhoads Lifters
Up to 5 more inches vacuum at idle!
And more vacuum means more low-end torque… Up to 30 ft/lbs more at 2000 rpm!Our newly developed Rhoads V-MAX Variable Duration Lifters make it all happen.  Fully adjustable, these Patent Pending lifters allow you to precisely adjust whatever reduction in lift and duration you want on the low-end.  Then as the rpm increases, so does your lift and duration. You get all the benefits of a big cam plus the vacuum and low-end torque of a smaller cam.  And they're anti-pump-up for maximum hi-end revs.  Fully dyno proven!  See the August '05 issue of Hot Rod Magazine for the full gains.  So drop in a set and watch the magic begin! SEE DETAILS